1. Name: Alien Projector Lamp
2. Color: Silver
3. Size: 130*130*310mm (5.1*5.1*12.2in)
4. Material: ABS+PC+Vinyl
5. Appearance: Robot
6.USB power supply: DC5V/2A
7. Product power: 6W
8. Laser wavelength: 532nm
9. Projection area: 30-40m²
10. Number of lamp beads: 168
11. Operation mode: infrared remote control + button
12. Remote control button function:
(1).Short press the main switch to switch the machine.
(2).Timer switch: Click the timer for 1 hour, double-click the timer for 2 hours, and if the command is sent successfully, the eyes blink once to remind the user that the setting has been successful.
(3).Nebula brightness plus: The nebula brightness is divided into 5 levels, the default is a short press in the middle to increase the brightness until the brightest
(4).Nebula brightness reduction: The nebula brightness is divided into 5 levels, short press once to reduce the brightness until it is the darkest.
(5).Nebula change speed minus Nebula change speed 5 gears (0-2-34/default 2 gears, 0 gears are still), short press once to slow down the speed until it is still.
(6).Nebula change speed plus Nebula change speed 5 gears (01-234/default 2 gears, 0 gears are still), short press once to increase the speed until the 4th gear is the fastest.
(7).Eye switch: short press to turn on the eye light, and short press again to turn off the eye light.
(8).Voice switch: Click to start recording for 10 seconds, then play the recording, and if you continue to record for 10 seconds and then play, repeat this mode until the user;
(9).Click to turn off the recording function or switch to another function. Star switch: short press to turn on the star, long press to turn off the star.
(10).Star breathing rate for 5 seconds: Short press to set the breathing flash for 5 seconds.
(11).The breathing rate of the stars is 10 seconds: short press to set the breathing flash for 10 seconds.
13. Button function:
(1).Switch button: short press to power on, all lights (nebula/stars/eyes) will be on at this time with the booting voice;
Double-click to turn off the nebula and stars; long press for 2 seconds to turn off.
(2).Nebula/Star switch: single-click to switch the nebula light mode; double-click to turn off the star.
(3).Voice/eye switch: click to control the voice switch (click the button to enter the recording mode, this
When the nebula is in a green static state, when the recording is played, the nebula is in a flowing mode, accompanied by clear eyes.
Breathing flash): Double-click to control the eye-clearing switch.
(4).Power socket: external power supply and charging interface.
(5).Infrared receiver: The remote control receives the signal.
Note: It is forbidden to rotate the head in the opposite direction to avoid the product from collapsing due to the unstable center of gravity